On-Site / Internet / WAN Submetering
CaptureONE™ Software (CPO-1)
Excellent for all AMR SUB-METERING Applications
Description CaptureONE Submetering Software provides a unique set of features for any submetering application. The CPO single-site version (CPO-1) may be installed at the monitored site on any PC equipped with a serial port for connection to the CPO-RX wireless AMR receiver and a modem or Ethernet connection to a LAN/WAN/Internet for downloading meter data files for billing, cost accounting, customer support or other management purposes. The CPO Corporate, multi-site version (CPO-1N) may be located at the owner’s corporate office. In this case, Monitrol serial server or client software is located at the monitored site and all monitoring is in real-time via the network (Internet, LAN or WAN). In addition to meter reading, data storage and transfer functions, the system monitors a group of alarm and status functions not normally available in automatic meter reading applications. It also allows the user to add additional “alarm only” devices to the system and receive a variety of alarms via the metering system. Alarms and status information is instantaneous and may be monitored by your own personnel or by Monitrol Utility / Alarm Central Station for a nominal monthly fee.	CaptureONE™ Submetering / Alarm Software “WIRELESS AUTOMATED METER READING” APPLICATIONS q Utility & Energy Conservation / Waste Management q Multi-family Utility Submetering q Commercial & Institutional Submetering q Equipment Status and Malfunction Alarms q Facility Alarms q Heating, Cooling, Water, Electric, Gas Submetering FUNCTIONS: § Meter reading and data storage § Capacity – 2000+ devices per site (or port) ALARMS: § Case Open, Low Battery § High Daily Usage, No Usage x# of hours(days) § Equipment Malfunction § Freezing Temperatures § User Defined Compatible with INOVONICS TapWatch™, Monitrol CaptureONE™ and AMCO InsideR™ Quality AMR Systems 1-877-876-7830
e/s Monitrol, Inc. ™ TapWatch is a trademark of Inovonics Wireless Corp; CaptureONE is a trademark of e/s Monitrol, Inc; InsideR™ is a trademark of AMCO Water Metering Systems, Inc

CaptureONE™ Automated Meter Reading (AMR) System & CaptureONE™ Software (CPO-1) System Features
DATA RECORDED
Hourly Meter Readings	24 hrs per day
Daily Meter Totals	Actual total for that specific day
Individual Hour	Actual counts for each hour
Running Total Meter Counts	Actual total on-going totals
Total Transitions	Devices defined as “status” record number of times going ON/OFF
Total Case Alarms	Devices defined as “meters” record number of time the Case is Opened
Non-use hours	Total number of hours since device last has recorded usage or consumption
Consecutive hours	Total number of consecutive hours device has recorded usage or consumption
Last TX Time & Date	Last Transmitter Reception
All TX Times and Dates	Store each hour transmission time for as long as data is kept on system
Alarm incidents	Store alarms in a master file for the month

SYSTEM CAPACITY
Devices per Site	2048 per port (any combination of meters, alarms, status devices)
Zones (Buildings, floors)	256 per port basic version
Signal Repeaters	128 per port basic version
LAN/WAN/INTERNET Remotes	60 per CPO Software Copy (Windows limitations apply)
Days of data storage	Infinite (hard drive limits apply)

SYSTEM Features
Single site version CPO-1	Meter and monitor up to 20480 devices per site. NOTE: due to traffic capacity, on sites over 2000 devices some maintenance features may not function. However, metering function should work properly if actual time of reception is flexible
Network version CPO-1N	Meter and monitor up to 2048 devices per site. Up to 60 sites may be monitored from one PC. Communications is TCP/IP over LAN/WAN/INTERNET online communications.
Devices per Site	2048 per port (any combination of meters, alarms, status devices)
Zones (Buildings, floors)	256 per port
Signal Repeaters	256 per port
Quick Data Import	Quickly convert to CaptureONE without reprogramming or reregistering transmitters by importing data files from Inovonics DCC

SYSTEM ALARMS
Device Case OPEN / RESET	Alarms on case being opened
Lower Count	Device has lower count than recorded to this point (indicates potential reset)
High Usage	Device has recorded higher usage than set in system for this device (can indicate a broken sprinkler head, etc)
Sequential Hours	Device has recorded continuous usage for a preset number of hours. This can indicate a running toilet or faucet.
No Usage	Each alarm type may be set for an alarm if no usage has occurred for a preset number of hours. This could indicate a malfunctioning meter, a device wire cut, etc.
Missing Transmitter	Alarms if a device transmission has not been received for a preset supervision interval
Battery Low	Alarms if battery is low for a particular device
General Alarm	Devices may be defined as alarm devices. In this situation, the actual count may or may not be relevant. These units could be connected to such things as boiler alarms, chiller/compressor lockouts, freezing temperature sensors, high temperature sensors, doors, windows, motion detectors, etc.
ALARM DATA STORED	Alarm Type, Device Name, Building, Unit (apt), Type, Meter ID #, Time, Date